Changelog

This is an old revision of the document!

All notable changes to OnAirScreen. Source: OnAirScreen CHANGELOG.md. Narrative release notes: 1.0.0 · 0.9.8.

All notable changes to this project will be documented in this file.

GPIO Custom command uses the same pencil editor as Links (Settings and Web UI)
Links Custom command is edited from a pencil icon; the icon is highlighted when a command is set

Settings Links no longer leaves a blank gap between the instance hint and the nearby-screen list
Web Settings Links instance hint stays in place so Add as replica / Use as source no longer shove the form
Links mapping Custom field is extra API commands when the source is active; Local target Custom only skips LED/AIR/text
Links Follow all disables Local target and Invert (full status copy does not use them)
Links replica and source grids fit the Settings width without a horizontal scrollbar
Add as replica / Use as source fill the next empty row; a notice is shown when all 8 are in use
Links instance dropdowns no longer show Studio-1 or Studio-2 as the empty placeholder
Web Settings hints wrap on the full row; Links Replicas/Sources tabs no longer overlap Add as replica / Use as source
Settings Links instance fields are nearby-screen dropdowns so each replica/source row can pick its own screen
Link replicas no longer show host-local WARN copy (quit, reboot, shutdown, NTP)
Link status is pushed on change (replicas and mapped sources); the HTTP poll is only a slow retry, not a per-screen chatter loop
Replica LEDs and other runtime status push immediately instead of waiting for the 400 ms poll
Link replicas and sources follow the instance name on the LAN; a stored host is only a fallback if discovery misses them
Web UI Links matches Settings: Nearby list, Add as replica / Use as source, Replicas and Sources grids
Settings Links keep the Nearby selection when the peer list refreshes
Web UI and Settings Apply reject an instance name already used on the LAN and show the collision warning

Settings Links: discover other OnAirScreens by instance name (multicast) or host/port; add replicas for 1→n full runtime status (LEDs, AIR, NOW/NEXT/WARN) or map individual signals (hallway tallies)
Settings warn when another OnAirScreen on the LAN uses the same instance name; discovery no longer picks one host at random
Right-click menu shows the current OnAirScreen version as info
Raspberry Pi SD-card image allows passwordless host reboot and shutdown from OnAirScreen

Weather widget stays on the AIR LED column width; long city names are elided instead of pushing the clock
Weather widget shows the searched city name instead of the OpenWeatherMap station or neighborhood name
Weather widget keeps the current city when switching °C / °F / K (Apply uses the dialog city ID, not a stale settings read)
Web UI Instance Name accepts at most 32 characters
HTTP server no longer does reverse DNS on bind or request logging (avoids multi-second stalls)

Application log starts with a Starting OnAirScreen line (version and distribution)

Linux PTP logs whether the 319/320 bind helper is missing or failed
Linux PTP bind helper receives the comm socket on stdin

Web UI and API command FULLSCREEN:ON/OFF/TOGGLE to switch the main window
Reboot and Shutdown buttons in Settings → About and the Web UI (with confirmation); HTTP CMD:REBOOT / CMD:SHUTDOWN require the Web Settings PIN when one is set
GPIO (Raspberry Pi and Livewire) can map one input to several preset actions plus semicolon-separated custom commands

add SNMP enterprise OID IANA PEN 66873 (.1.3.6.1.4.1.66873); remove placeholder
SNMP MIB is published on the wiki (onairscreen:mib-en)

Closing the main window while Settings is still open now exits the app
Linux/Raspberry Pi PTP binds UDP 319/320 via a small helper so the app can run as a desktop user

SNMPv2c/v3 agent (GET/SET/WALK on port 1161, optional traps) for LEDs, AIR timers, texts, silence, and loudness; MIB in mibs/ASTRASTUDIO-ONAIRSCREEN-MIB.txt; Settings Network tab shows SNMP beside UDP/MQTT/OSC
Axia Livewire GPIO LWRP: follow GPI/GPO on a device over TCP 93 (read-only), alongside multicast

Weather widget backgrounds use a new photographic set for OpenWeatherMap icons 01d–50n

SNMP GET for NOW/NEXT/WARN and other status objects reads the live screen instead of an empty cache
SNMP agent no longer logs an asyncio error when OnAirScreen quits
Timer dialog accepts 2:10 as well as 2,10 and 2.10
Timer dialog selects the existing value when opened with Enter
Weather widget labels stay readable on bright photo backgrounds (soft shadow + overlay)
Web settings: GPIO Custom Command is disabled unless Action is Custom
Web settings GPIO row fields are disabled unless that GPI Enable is on
Desktop GPIO row fields are disabled unless that GPI On checkbox is on

Axia Livewire GPIO (multicast): follow a source channel’s GPO/GPI pins (e.g. mic ON lamp) in parallel with Raspberry Pi GPIO
Main-window hotkey overlay (H, or right-click / long-click → Hotkeys): lists shortcuts; close with H, Esc, or a click outside. Other hotkeys are blocked while it is open

PTP: retry UDP 319/320 bind when the ports are in use or permission is denied; log the cause; lock LED and WARN show PTP ERROR until bind succeeds
German manual links to the English GPG wiki page (gpg-en); the German GPG how-to is removed

First stable 1.0.0. Changes since 0.9.8 are listed in the 1.0.0beta sections below.

Require python-osc >=1.10.2

LED and AIR timer on and off color changes take effect immediately after Apply

Analog clock faces Analog Numbers (1–12 on the classic analog face), Analog Studio (white face with 1–12), Analog Railway (station clock with a red ring second hand), Analog 24h ticking, and Analog 24h smooth (cream face with 1–12 and 13–24)
Clock face setting Clock/face and CONF:Clock:face= for digital and analog styles
README and manuals show screenshots of all clock faces

Clock mode in Settings and the Web UI is a dropdown instead of Digital/Analog radio buttons
Context menu Start/Stop/Reset I+LRA are enabled only when they apply to the current session
CONF:Clock:digital=False selects the classic analog face

I/LRA no longer burns a CPU core on long sessions: history stays in a NumPy buffer, blocks below −70 LUFS are not stored, and gated I is refreshed about once per second

Settings option to always start in fullscreen mode, even if the last session was windowed (General/always_start_fullscreen, default off)

GitHub README presents shop builds as the supported way to run OnAirScreen; the repository is documented as source-available for audit and contributors, not as an installer
Automatic update checks also run every 24 hours while OnAirScreen is running; the new-version dialog appears only at startup
Audio meter width can be set up to 201 px (L/R bars were previously capped around 117 px)
Installation chapter in the manuals covers Windows MSI, macOS Gatekeeper, Linux packages, and flashing the Raspberry Pi SD image
Manuals use an annotated main-screen screenshot

Long-press on the main screen no longer uses deprecated Qt mouse-position APIs

Long-click / long-press on the main screen opens the same context menu as right-click

Raspberry Pi GPIO import of system gpiozero no longer fails for missing freeze stdlib modules (colorsys, fractions)

Raspberry Pi GPIO works in the packaged app by loading system python3-gpiozero / python3-lgpio (the freeze does not bundle them)

Raspberry Pi GPIO inputs map mixer GPI contacts to LEDs and AIR timers (Settings → GPIO), with wiring diagrams and pinout links in the manuals

GPIO wiring diagrams in the manuals show a PC817 module with silkscreen terminals IN1–IN8 / GND and OUT1–OUT8 / GND

Left-click on status LEDs and AIR timers toggles them (same as the hotkeys)
Right-click Quit OnAirScreen on the main screen
On-screen WARN QUITTING ONAIRSCREEN while the app is shutting down
Web UI Add to Home Screen on iPhone/Android uses the OnAirScreen icon

Web UI uses a flat studio look: CI color blue, square inputs, and settings tabs on the left like the desktop dialog
Web UI theme, settings, and version controls scroll with the page instead of staying pinned to the corners

Web UI AIR timer and loudness buttons no longer overflow the viewport on phones
Web UI home-screen icon is an opaque 180×180 PNG at the site root so iOS picks it up
Ctrl+C / SIGINT shows the same QUITTING ONAIRSCREEN WARN as Q and the context menu
Opening Settings / Apply no longer segfaults on Raspberry Pi: the Python mouse event filter is gone; main-screen children let double-click and right-click through to the window
Audio meter heading "LUFS" in the L/R + LUFS layout is no longer clipped on the left and right

Settings window opens at 700×800 and can be resized freely (height is no longer capped at 800px)

Settings tabs (except General) scroll vertically in the UI; content stays within the window width instead of shifting sideways
Audio meters use much less CPU on Raspberry Pi and other software-rendered displays: bars paint from cached pixmaps, and true-peak / BBC PPM / LUFS DSP runs only when the current meter setup needs it
Opening Settings no longer segfaults: the main-screen mouse filter watches the application instead of installing on every new child widget
Replaced deprecated QColor.setNamedColor() with QColor.fromString()
Web UI: Instance/Version/Connection block stays top-right; settings gear sits to its left

Right-click Start I+LRA and Stop I+LRA on the main screen (when meters are enabled)
Web UI settings overlay (gear, top right): edit all OnAirScreen settings, optional PIN (Network/websettingspin), Apply, and preset load/save
Web UI Audio Meters: Livewire Source and AES67 Stream dropdowns with live discovery and Paste SDP, matching the desktop Settings dialog

Default TOTH timer label is TOTH instead of TOTH Timer

Windows: opening Settings → Fonts no longer access-violates on first open. The mouse event filter is installed after widgets exist, and the font database is warmed at startup
Main-screen hotkeys work again. The mouse event filter no longer consumes ShortcutOverride and key events, so QShortcut still reaches Qt

Persistent log folder with rotating onairscreen.log, crash reports for uncaught Python exceptions, and fault.log for native faults; About tab shows the path and can open the folder
After a crash, the next start shows a dialog (open log folder, auto-closes after 30 seconds with a progress bar)

Uncaught main-thread exceptions and Qt fatal messages write a crash report, then quit (no dialog at crash time). Thread and asyncio errors are logged without exiting.

Fresh installs without Audio/layout now use L/R + LUFS (both) instead of falling back to L/R only
Settings audio-device Refresh re-scans PortAudio so newly plugged or unplugged inputs appear immediately

OnAirScreen Source-Available License (OASL 1.0): source may be used, modified, and redistributed; compiled/binary redistribution requires written permission
Application file headers point to OASL; Settings License tab shows OASL plus third-party notices

TOTH Timer label text is configurable (Timers/TimerTOTHText, default TOTH Timer)
Bundled Noto Sans (Regular, Bold, Italic, Bold Italic) as an additional font family alongside Roboto
Web-UI Loudness I+LRA tile shows live I (LUFS) and LRA (LU); lufsI / lra in /api/status and WebSocket; MQTT sensors {base}/lufs/i and /lra; OSC /oas/lufs/i and /oas/lufs/lra

Weather widget text shadows work again under PySide6 (drop-shadow effects are parented so they are not garbage-collected)
AoIP source change without RTP now drops the meters to the floor instead of freezing on the previous level

Settings Network and Time Source tabs align labels and fields in a shared two-column form layout
License dialog and THIRD_PARTY_LICENSES.md now document PySide6/Qt (LGPLv3), the analog clock BSD example, and Roboto (SIL OFL) instead of PyQt GPL
Application BSD text removed from LICENSE and the Settings license tab pending the forthcoming source license
Default audio meter layout is L/R plus programme LUFS (both); default width is 115px and the maximum is 150px

Digital clock no longer aborts when a time sample has no SMPTE frame count
Startup no longer crashes when listing host addresses under PySide6

Qt binding switched from PyQt6 to PySide6
Settings window opens at 700×800 and is capped at 800px height so it fits smaller screens, audio meters tab uses two columns
Station and slogan color pickers in Settings no longer show a live preview
dBTP meter hides the orange ceiling peg when the Too Loud indicator is off

Meter layouts: L/R only, programme LUFS only, or both (Audio/layout: lr / lufs / both; BBC PPM stays L/R-only)
Programme LUFS bar (EBU R128): momentary M with a short-term S tick (I and LRA stay off until started)
Optional gated Integrated I + LRA (off until started): LUFSI:START / STOP / TOGGLE / RESET via UDP, HTTP, OSC, MQTT, Web-UI, and Companion
MQTT Home Assistant: Loudness I+LRA switch and reset button ({base}/lufs/integrated/set and /state); lufsIntegrated in /api/status and WebSocket
Right-click Reset I+LRA on the main screen (when meters are enabled); LUFSI:RESET restarts a running session or hides frozen I/LRA when stopped
Existing configs with Audio/unit=lufs (no layout key) migrate to layout lufs and L/R unit dbtp
AIR3 shows ▲ (count-up) or ▼ (count-down) under the timer icon
AIR3 shows TOTH Timer while top-of-hour countdown is active, then restores the configured label
Web-UI: AIR3 time input (m:ss, m,ss, or seconds) and count-up vs. countdown in the status tile
Web-UI: silence alarm and loudness I+LRA in live status; keys 1–4 toggle LEDs (ignored while typing)
Web-UI: persistent connection badge (Live / Polling / Offline)
countDown in /api/status for AIR timers (true while AIR3/AIR4 is counting down)
Bitfocus Companion HTTP module (astrastudio-OnAirScreen) as the recommended Stream Deck path; Generic OSC remains as an alternative
OSC remote control on UDP port 8000 (/oas/...): set commands, query-reply to the sender, optional status push for Companion Generic OSC
Settings Network tab (after General) for UDP, HTTP, multicast, MQTT, and OSC; General / Advanced tab titles no longer include “Settings”
Silence Detection on the current audio source (Local / Livewire / AES67): dBFS threshold, duration (default 10 s), recovery time, optional OAS WARN, optional HTTP GET on trigger
Silence alarm as API boolean (silence in /api/status and WebSocket) and MQTT {base}/silence/active (Home Assistant binary sensor)
Option to treat a missing device/stream as silence (on by default)
DNS-safe instance name (Settings General, default Studio-1, max 32 characters, LDH hostname label) so each OnAirScreen can be identified by location; shown in the Web-UI, /api/status (instance), MQTT {base}/instance/state, and as a Home Assistant sensor; HA device name becomes OnAirScreen (Studio-1)
CONF:General:instancename=TEXT to set the instance name remotely
Double-click on the main screen toggles fullscreen
Right-click context menu on the main screen: Toggle Fullscreen, Settings

Default meter width is 79 px (extra width still thickens the L/R bars)
CONF:Audio:unit=lufs now switches the layout to programme LUFS instead of using LUFS as an L/R unit
Default audio meter unit is dBTP; TooLoud is enabled by default

Clock no longer freezes after an NTP timeout: NTP results are delivered on the GUI thread, and a watchdog restarts a dead clock timer
Clock watchdog no longer aborts when a time sample is missing
Opening Settings no longer paints a running AIR timer (including TOTH) as inactive or resets its displayed time to 0:00
Web-UI restores the WebSocket after falling back to HTTP polling
Opening Settings again brings the existing window to the front instead of reloading it

Stereo audio meters on the left (on by default, Local Input): L/R bars with RMS fill and peak overlay
Display units: dBFS, dBTP (true peak), LUFS (momentary), BBC PPM (Type IIa, marks 1–7)
Peak hold marker (default 1.5 s, can be disabled) and display style Solid or Bargraph
LUFS reference peg via presets (EBU R128 −23, ATSC A/85 −24, AES −16/−18, Custom)
Adjustable meter width (extra width goes into thicker L/R bars)
Optional TOO LOUD action: on-screen warning (priority 1) or trigger LED 1–4 when true peak exceeds the threshold; dBTP ceiling peg uses that threshold
Audio sources: Local Input (PortAudio), Livewire AoIP multicast, AES67 multicast RTP (SAP or pasted SDP)
Shared AoIP Interface for Livewire/AES67 IGMP join (empty = system route)
Livewire: advertised sources listed while Settings are open (239.192.255.3 UDP 4001); pick a name or enter channel 1–32767 (channel N → 239.192.0.0+N UDP 5004, L24/48 kHz stereo)
AES67: SAP discovery on 239.255.255.255 and RFC 2974 224.2.127.254 UDP 9875 while Settings are open; live stream list (None / SAP / pasted SDP); L16/L24 at 44.1/48/96 kHz, meters use the first two channels
Settings Audio Meters tab and CONF:Audio:* keys (source, unit, TooLoud, meter width, LUFS reference, peak hold, display style)

Date display follows the configured Formatting/dateFormat setting
Digital AM/PM clock: midnight displays as 12 (12-hour mapping)
NTP lock LED no longer stays green when the server is unreachable
Autoflash / timedflash LED regression and Web-UI blink
MQTT reconnect and AES67 capture restart stop during application quit

Persist windowed position and size across restarts (Window/geometry); restored when not in fullscreen
OpenWeatherMap city search in Settings: type a city name next to City ID, Find, pick a match
Mask Update Key, MQTT password, and OpenWeatherMap API key; slashed-eye toggle reveals them
Time Source settings tab: Local System Clock, NTP Server, PTPv2 IEEE 1588-2008, or LTC
NTP and PTP steer an independent display clock (monotonic timebase); the OS clock is never set
PTP: software slave on 224.0.1.129 UDP 319/320, configurable interface (independent of AoIP) and domain 0–255
LTC: Leo Bodnar LBE-1110 USB-serial SMPTE reader, or SMPTE LTC decoded from a local PortAudio input (Left/Right); display shows HH:MM:SS:FF, holds last timecode on signal loss
LTC audio uses its own capture device (not Audio Meters / Livewire / AES67); opening the same device for meters and LTC can fail on some hosts
LTC unlock WARN (Clock not LTC synchronized etc.) is optional and off by default; the LTC NOT LOCKED LED always remains
AES67: SAP discovery on 239.255.255.255 and RFC 2974 224.2.127.254 (UDP 9875)
PTP: apply TAI−UTC only when the master announces the PTP timescale (fixes ~37s offset vs software ptp4l)
NTP Check settings moved from General to the Time Source tab
Clock lock LED (bottom right, seconds-LED size): green when the selected time source is locked, red when not; caption PTP LOCK / NTP LOCK / LTC LOCK (or NOT LOCKED)
NTP Server field stays enabled when Time Source is NTP, even if NTP-Check is off
Top-of-Hour countdown for Radio Timer (AIR3): wall-clock synchronized countdown to the next full hour (display format M:SS)
Top-of-Hour: Hotkey T to toggle countdown (stop resets display to 0:00)
Top-of-Hour: API command AIR3TOH:[ON/OFF/TOGGLE] via UDP and HTTP
Top-of-Hour: MQTT topic {base_topic}/air3/toh and status topic air3/toh/state (Home Assistant button via Autodiscovery)
Top-of-Hour: Web-UI "Top of Hour" button for AIR3
Top-of-Hour: topOfHour field in /api/status for air[3]
API: TOGGLE for LED1–4, AIR1, AIR2, and AIR4 (same ON/OFF/TOGGLE pattern as AIR3)
German and English user manuals (BEDIENUNGSANLEITUNG.md, USER_MANUAL.md) with README links
Refactoring: Extracted NTP management to ntp_manager.py module
Refactoring: Extracted font loading to font_loader.py module
Refactoring: Extracted signal handlers to signal_handlers.py module
Refactoring: Extracted system operations to system_operations.py module
Refactoring: Extracted status export to status_exporter.py module
Refactoring: Extracted UI updates to ui_updater.py module
Refactoring: Extracted hotkey management to hotkey_manager.py module
Refactoring: Extracted logging configuration to logging_config.py module
Error Handling: Unified error handling system with custom exception hierarchy
Error Handling: Custom exceptions for all error types (Network, Command, Configuration, Validation, API, Encoding, Widget)
Error Handling: Consistent logging strategy with log_exception() helper function
Error Handling: HTTP error response mapping based on exception types
Error Handling: Comprehensive exception handling in network.py, command_handler.py, start.py, weatherwidget.py, mqtt_client.py, settings_functions.py
Tests: Unit tests for exceptions module (26 tests covering all exception types and logging helper)
MQTT integration with Home Assistant Autodiscovery support
MQTT: LED switches (LED1-4) for controlling LEDs via MQTT
MQTT: AIR timer switches (AIR1-4) for starting/stopping timers
MQTT: AIR timer sensors (AIR1-4 Time) for displaying elapsed time in seconds
MQTT: Reset buttons (AIR3/AIR4 Reset) for resetting timers
MQTT: Text entities (NOW, NEXT, WARN) for setting text fields
MQTT: Automatic status updates after state changes
MQTT: Automatic reconnection and autodiscovery re-publishing on reconnect
Settings: MQTT configuration (Server, Port, Username, Password, Device Name)
MQTT: Base topic automatically generated from "onairscreen" + unique device ID (last 6 hex characters of MAC address)
Web-UI: Dark Mode support with theme toggle button and automatic persistence
Web-UI: Warning priority system with support for NTP warnings (priority -1), normal warnings (priority 0), medium priority (1), and high priority (2)
Web-UI: Display NTP warnings in Current Status section with blue color coding
Web-UI: X button to delete warnings directly from status display (for priority 0-2)
Web-UI: Improved Current Status layout - organized in rows (LED1-4, AIR1-4, NOW/NEXT)
Web-UI: Compact design for NOW/NEXT status items and input fields
Web-UI: AIR Timer Controls now show timer labels (Mic, Phone, etc.) directly on buttons
Web-UI: NOW/NEXT input fields placed side by side (50% width each)
Settings: Preset/Profile management - save, load, list, and delete configuration presets as JSON files
Settings: UI buttons for preset management (Save, Load, Delete)
Settings: Log level configuration (DEBUG, INFO, WARNING, ERROR, CRITICAL, NONE) with ComboBox in General settings
Command-line: --loglevel option to override log level settings (temporary, not saved)
Tests: Comprehensive unit test coverage for defaults.py (17 tests for get_default() function)
Tests: Comprehensive unit test coverage for weatherwidget.py (23 tests for WeatherWidget class)
Tests: Comprehensive unit test coverage for clockwidget.py (25 tests for ClockWidget class)
Tests: Extended test coverage for start.py with 11 tests for set_log_level() function
Security: Comprehensive input validation for all network commands (UDP/HTTP)
Security: Text input sanitization for NOW, NEXT, WARN commands (removes control characters, dangerous patterns)
Security: Command value validation for LED, AIR, CMD commands (validates allowed values)
Security: Length limits for text inputs (500 chars for NOW/NEXT/WARN, 1000 for CONF)
Security: Input validation for CONF commands (stationname, slogan, LED text, AIR text)
Refactoring: Extracted NTP management to ntp_manager.py module
Refactoring: Extracted font loading to font_loader.py module
Refactoring: Extracted signal handlers to signal_handlers.py module
Refactoring: Extracted system operations to system_operations.py module
Refactoring: Extracted status export to status_exporter.py module
Refactoring: Extracted UI updates to ui_updater.py module
Refactoring: Extracted hotkey management to hotkey_manager.py module
Refactoring: Extracted logging configuration to logging_config.py module

Fonts settings: family combo (includes bundled Roboto), separate size, bold, and per-row reset instead of the native font dialog
LED1–4 default font size is 32pt
Default UI font is now bundled Roboto (FreeSans removed); existing FreeSans settings are mapped to Roboto
Audio meters are enabled by default with Local Input (device) as the source
Require Python 3.11 or newer; bump websockets to >=17.1
Clock: Digital clock second LEDs and colon now repaint aligned to wall-clock second boundaries (removes visible lag at second rollover)
Refactoring: Reduced start.py from 1711 lines to ~1415 lines by extracting logical components into separate modules
Refactoring: Improved code modularity and maintainability by separating concerns into dedicated modules
Refactoring: All tests updated to use new modular structure (583 tests passing)
Code Quality: Removed unnecessary backward compatibility code after refactoring
Code Quality: Simplified initialization code using for loops for LED and AIR timer setup
Error Handling: Replaced generic Exception handling with specific custom exceptions throughout codebase
Error Handling: Standardized error logging with consistent format and context information
Error Handling: Improved HTTP error responses with appropriate status codes based on error types
Web-UI: Fixed dark mode flash on page reload by setting theme immediately in HTML head
Web-UI: Restructured status display for better organization and space efficiency
Command Handler: Enhanced WARN command to support priority format (WARN:Prio:Text)
MainScreen: Implemented priority-based warning system with array index mapping
MainScreen: Updated process_warnings() to display highest priority warning (excluding NTP if others exist)
MainScreen: Simplified update_ntp_status() to use priority -1 directly
API: get_status_json() now returns warnings array with priorities in addition to legacy warn field

WebSocket support for Web-UI: Real-time status updates via WebSocket connections (replaces HTTP polling)
Integration tests for network communication (UDP, HTTP, WebSocket)
Extended unit tests for timer_manager, event_logger, and command_handler modules
Test tools: cmdtest_multicast.py and diagnose_multicast.py for multicast testing and diagnostics
Central configuration file (defaults.py) for all default values
Type hints and docstrings throughout codebase
Context manager (settings_group) for QSettings group operations

Network: Improved multicast support for macOS - UDP server now explicitly joins on loopback interface too
Network: Improved socket configuration for reliable multicast sending on macOS
Network: HTTP server now uses ReusableHTTPServer with SO_REUSEADDR to prevent TIME_WAIT issues
Security: Replaced os.system() with subprocess.run() for secure system command execution
Error handling: Enhanced error handling for network operations, timer input parsing, and color validation
Error handling: Graceful degradation when resources (fonts, templates) are missing
Makefile: Follow symlinks when searching for rcc tool in Homebrew installations
Fixed: IP addresses now correctly displayed at startup

Web-UI: Complete web-based remote control interface accessible via HTTP
Web-UI: Real-time status display for LEDs, AIR timers, and text fields (NOW/NEXT/WARN)
Web-UI: LED control buttons with toggle functionality
Web-UI: AIR timer controls with start/stop and reset (for AIR3/AIR4) buttons
Web-UI: Text input controls for NOW, NEXT, and WARN messages
Web-UI: REST-style API endpoints (/api/status, /api/command)
Web-UI: Version and distribution information displayed in top-right corner
Web-UI: Modal dialog with overlay for connection errors (always visible, dims background)
Web-UI: Clear buttons for NOW/NEXT text inputs
Web-UI: Current NOW/NEXT/WARN texts displayed in status panel
API: Status endpoint now includes version and distribution information

Web-UI: HTML template moved from network.py to separate templates/web_ui.html file for better maintainability
Web-UI: Connection error modal now disables all controls when connection is lost
Network: HTTP server now supports Web-UI in addition to command API
Network: Improved thread-safety for GUI operations from HTTP thread using pyqtSignal

Event logging system for tracking LED changes, AIR timer events, commands, warnings, and system events
Tooltips for all settings widgets to improve user experience

Fixed weather widget API calls when widget is disabled or no API key is configured
Removed unused font button

Command test scripts for HTTP and UDP testing (utils/cmdtest_http.sh, utils/cmdtest_udp.sh)
Show version, distribution and settings path in about dialog
Fonts/COPYING file

Major code refactoring: extracted command handler, network module, and timer manager to separate modules
Use context manager for QSettings groups
Consolidated text setters and timer reset methods
Consolidated AIR reset and start_stop methods
Consolidated LED toggle methods
Consolidated set_station_color() and set_slogan_color() methods
Consolidated set_led1-4() methods into generic method
Split restore_settings_from_config() into smaller methods
Optimized led_logic() method
Optimized font setup in restore_settings_from_config()
Modernized string formatting to f-strings
Refactored parse_cmd() using command pattern
Added logging, type hints, and docstrings throughout codebase
Fixed crash when UDP/HTTP ports are empty
Updated copyright strings
Updated settings.ui

options to change icons on all 4 timers

option for preferred logo position

fixed textclock when hour == 12
fixed wrong default font size for slogan
refactored text clock code
fixed crash when using API to configure boolean fields
API: you can now use colors in web notation (#00FF00) and hex notation (0x00FF00)
fixed slogan font in settings
fixed analog clock style

french localization for textclock
left LEDs are now customizable (text/color)
settings for left LEDs minimum width
IPs can be automatically replaced with custom text after 10s
API commands for added functions
New Hotkey "I" to display IPs for 10 seconds
added option to select between no/separate/combined seconds display
added logo to analog clock

fixed crash when OWM API responds with strange JSON
OWM API uses https now
fixed calling API error when WeatherWidget is disabled (Thanks to ywiskerke)
added dutch language support (Thanks to ywiskerke)
fixed wrong hour in xx:45 textclock display

Alt-S now resets stream timer
added enable/disable option for timers 1-4
fixed unit display in weather widget
fixed crash introduced through a lazy print
fixed logo size calculation for portrait format logos
customizable font and size for various elements

Fix crash when timer value is not numeric
Fix show/hide of weather widget
Fix HTTP API full UTF-8 support
Fix crash when restoring config on .ini style platforms, boolean type mismatch
Localized "WEATHER" string in Weather Widget

HTTP API
Update check support
Show/hide LED1-4
Show/hide TextClock

Fix window resize when displaying long text in NOW/NEXT/WARN

this changelog
selectable blinking/static colon for HH:MM in digital clock mode

Fix update of weatherwidget when location is changed

Changelog

1.0.7

Changed

Fixed

1.0.6

Added

Fixed

1.0.5

Added

1.0.4

Fixed

1.0.3

Added

Changed

Fixed

1.0.2

Added

Changed

Fixed

1.0.1

Added

Changed

1.0.0

1.0.0beta15

Changed

Fixed

1.0.0beta14

Added

Changed

Fixed

1.0.0beta12

Added

Changed

Fixed

1.0.0beta11

Added

Fixed

1.0.0beta10

Fixed

1.0.0beta9

Added

Changed

1.0.0beta8

Added

Changed

Fixed

1.0.0beta7

Changed

Fixed

Added

1.0.0beta6

Changed

Fixed

1.0.0beta5

Added

Changed

Fixed

1.0.0beta4

Changed

1.0.0beta3

Added

Fixed

Changed

1.0.0beta2

Fixed

Changed

1.0.0beta1

Added

Changed

Fixed

0.9.9beta1

Added

Fixed

0.9.8

Added

Changed

0.9.7beta4

Added

Changed

0.9.7beta3